HELITE TURTLE AIRBAG VEST E-TURTLE 2 FL.YELLOW

Helite e-Turtle 2.0 air-cushioned vest

Helite presents a new vest with electronic airbag. Brand new technology for maximum protection on the road. A true revolution in protection and fall detection! The electronic airbag vest uses a multi-sensor sensing system that allows for a complete situation analysis and full 360-degree protection. For complete and optimum total protection, it is highly recommended to install a second sensor (SDU) on the fork of the motorcycle. This option allows to reduce the detection time from 60 ms (only with sensors in the belt) to 31 ms even at standstill, low speed and regardless of the impact angle.

Features:

Based on the Turtle 2.0 airbag vest
The mechanical release unit has been replaced by an electronic unit
Contains Turtle 2.0 and high-quality SAS-TEC back protection (attached to the airbag like tortoise shell)
Point loads on the back are effectively distributed and absorbed by the entire airbag
Protection is several times greater than with a standard airbag
Tortoise shell airbag systems have a technological advantage, especially in the event of a collision with sharp and sharp-edged objects (e.g. e.g. an obstacle, a branch or a part of a motorcycle).
Once the system is triggered, after 80-100 milliseconds (depending on size) the optimum pressure is reached, providing full protection
17-28 litres (depending on size) of protective volume provides protection for the neck, spine, ribs, pelvis, heel, head, collarbone and internal organs
By simply replacing the electronic insert, the vest can be reused immediately after use (if there is no external damage)
The new e-cover with clip-on connector
What has changed?

New and optimised battery
Improved on/off switch to prevent accidental switching off
The cartridge now has a “click” connector instead of a jack
Specifications:

Protection volume: 17-28 litres
Impact detection: 60 ms (from 31 ms with fork sensor)
Airbag recharge time: 80-100 ms (depending on size)
Optimised battery capacity
Improved on/off switch to prevent unintentional switching off of the control unit
Built-in protection: yes (SAS-TEC back protection)